Epoxy

For interior use with some indirect UV exposure or where much better color stability in varying cure cycles is desired. Achieving a good balance between Epoxy and Polyester, these coatings are ideal on display/store shelving and most indoor appliances.

Hybrid

For interior and non-critical weathering applications where chemical, electrical, or possible livestock ingestion environments are encountered.

Typical applications are on lab furniture, water/well pumps, certain engine components, childrens' toys, certain electrical components and livestock gates/fence posts. While "chalking" will occur progressively on outdoor exposure, protective properties are not impaired

Polyester TGIC

This is the most "forgiving" exterior powder coating vs non-TGIC polyesters. Excellent weather-ability, toughness and colour stability are hallmarks. Appearance is best at 1.5 mils and over. Very flexible, these coatings can be "post formed" provided proper tooling setups are used. A wide range of cure temperatures and dwell times can be used.

Most TGIC polyesters can be used for Aluminum extrusion, Automotive components, recreational and playground equipments, Fencing and outdoor light posts.

Superdurable Polyester

Also referred to as Enhanced Polyester, our Super Durable product line, listed under the AmeriShield® registered trademark, is available for both exterior aluminum and fiberglass Architectural Trim and Components. These powders meet or exceed the performance requirements as defined by the AAMA 2604 and 624 specifications, exhibiting superior hardness and "stucco resistance" when compared to Kynar resin based liquids and powders. We offer a Five Year Limited Warranty to applicators with approved, qualified processes. Please ask your representative for details.

Polyester Non TGIC

This coating uses a "Primid" type curing agent, developed as an alternative to TGIC curing systems. These coatings are used on a decreasing basis, primarily due to appearance issues at heavy film thicknesses.

New raw materials and processes are continuously evaluated for ongoing product development and enhancement — improved properties, lower cost!

Polyester Urethane

Provides excellent leveling, smoothness and gloss. Superior hardness can be achieved (usually one "pencil" more than TGIC) and is designed for relatively low film build. Certain chemical resistances can be developed to a high level. This product is sensitive to cure parameters; they must be closely followed for optimum results.

High Heat (Silicone) / FDA Compliant

AmeriCoats offers silicone resin based powder coating with heat resistance up to 1200°F. This product line is suitable for a wide variety of applications including fireplaces, barbeques, heating appliances, automotive mufflers and headers, and other industrial applications. We also offer FDA compliance coating for direct and indirect food contact. They are available in a variety of colors and finishes.

Acrylic Hybrid

This technology platform will meet key specifications up to AAMA 2605 and 625. These special resins now have a 10+ year track record, offering improved ultra violet stability versus Super Durable powders and improved hardness and stucco resistance versus Kynar resin based liquid and powder materials.

Bonded Metallic

Royal Spectrum’s bonded metallic powder coatings are produced by a proprietary process that attaches metallic pigments to powder particles resulting in a homogeneous incorporation of the metallic pigment throughout the finished product. The bonded metal-powder particles allow for consistent application properties, the development of uniform appearance of the cured paint film, and the reclaim-ability of overspray powder.

Royal Spectrum offers many different metallic powder coatings - bonded and non-bonded; smooth, textured and veined; various gloss levels and resin systems. A number of metallic coatings are regularly in stock by customer request. Please contact customer service for further information, colour panels, or powder samples.

Powder Coatings on wood MDF

Royal Spectrum’s bonded metallic powder coatings are produced by a proprietary process that attaches metallic pigments to powder particles resulting in a homogeneous incorporation of the metallic pigment throughout the finished product. The bonded metal-powder particles allow for consistent application properties, the development of uniform appearance of the cured paint film, and the reclaim-ability of overspray powder.

Royal Spectrum offers many different metallic powder coatings - bonded and non-bonded; smooth, textured and veined; various gloss levels and resin systems. A number of metallic coatings are regularly in stock by customer request. Please contact customer service for further information, colour panels, or powder samples.

Powder Coating on Fiberglass

Royal Spectrum’s bonded metallic powder coatings are produced by a proprietary process that attaches metallic pigments to powder particles resulting in a homogeneous incorporation of the metallic pigment throughout the finished product. The bonded metal-powder particles allow for consistent application properties, the development of uniform appearance of the cured paint film, and the reclaim-ability of overspray powder.

Royal Spectrum offers many different metallic powder coatings - bonded and non-bonded; smooth, textured and veined; various gloss levels and resin systems. A number of metallic coatings are regularly in stock by customer request. Please contact customer service for further information, colour panels, or powder samples.

Powder Coating on Glass

Royal Spectrum’s bonded metallic powder coatings are produced by a proprietary process that attaches metallic pigments to powder particles resulting in a homogeneous incorporation of the metallic pigment throughout the finished product. The bonded metal-powder particles allow for consistent application properties, the development of uniform appearance of the cured paint film, and the reclaim-ability of overspray powder.

Royal Spectrum offers many different metallic powder coatings - bonded and non-bonded; smooth, textured and veined; various gloss levels and resin systems. A number of metallic coatings are regularly in stock by customer request. Please contact customer service for further information, colour panels, or powder samples.